CPU Chip Repair Dismantling Tool Kit Chip Demolition Paddle Knife Remove Glue Blade Solder Pad Spatula

CPU Chip Repair Dismantling Tool Kit Chip Demolition Paddle Knife Remove Glue Blade Solder Pad Spatula

CPU Chip Repair Dismantling Tool Kit Chip Demolition Paddle Knife Remove Glue Blade Solder Pad Spatula

  • StoreShenzhen Huaxin Electronic trade co., LTD
  • Volume Retail sales2 piece
  • Last PriceUS $7.19piece
  • ShippingFree Shipping
  • Product Rating5.0(9)
CPU Chip Repair Dismantling Tool Kit Chip Demolition Paddle Knife Remove Glue Blade Solder Pad Spatula
Product Name: remove CPU off point artifact remove Apple mobile phone motherboard chip tool repair disassemble with ultra-thin blade Easy dismantling of small and micro parts of various mobile phone main boards Features: 1: the blade machining thickness is thinner than the tin point, so it can be easily done between the chip and the bottom of the plate, and it is not easy to drop the point. 2: use it to remove the edge glue before dismantling the chip, because it is better than the blade and tweezers to make N times 3: the difference between the warping glue and the blade or tweezers is that the blade tweezers can\'t be placed under the chip Suitable for repairing for Apple board tools to dismantle CPU disassembly chips 1: dismantling a variety of small chips will not drop a point 2: dismantling 6S power IC all kinds of glass IC, no glass, no point, no risk 3: dismantle the baseband CPU WIFI module, no risk will not drop 4:CPU upper level air, no risk 5: dismantling A4-A9 CPU has no risk, dismantling all CPU upper levels without risk 6: dismantling A8 A9 CPU for special purpose 7: a thick tin scraper, scraping CPU once, without repeated scraping. Features: blade is ultra-thin, good toughness, can be easily between the chip and the bottom of the plate, not easily lead to drop. Usage method 1: when the chip is removed, the edge glue and the black glue temperature around the chip are 200 2: the hot air gun is 150 degrees, and the wind speed is 60 to the main board for 2 minutes. 3: the hot air gun is replaced with a small head, and the temperature starts at 350 degrees, first blowing the position of the knife for 10 seconds and then swaying to the bottom of the chip. [Note: when the sway and so on, it is easy to put the knife in when the tin point is not melted and melted. ] A Packing List: 1 x 43 in 1 Set B Packing List 1 x 16 in 1 set 1 x Graver 5 x Blades